Patent #6,886,780) lock in place with a snap and provide the strongest landing gear of any trainer, also easily removeable.Landing Gear: Duraluminum SnapGear Quick Landing Gear Mounts (US.Sensitivity is adjustable as pilot gains flight skills.This system uses on-board electronic sensors that detect instability-just release the sticks and AFS does the rest.AFS (Active Flight Stabilization) that actively searches for any signs of instability and takes immediate action to correct them.Radio: Futaba 4YBF 4-channel FM radio with(micro) square trainer port.Engine is mounted on IsoSmooth Mount to isolate airframe and radio gear from damaging vibration.High-Speed Needle to prevent engine from being run too lean.Needle Valve extender/limiter that limits the movement of the.Covering: Polyester based heat shrink, color scheme is White and Red with Silver accents.Airspeed Restrictor: SpeedBrakes Training Flaps attach to forward section of wing near fuselage and hold airspeed to a minimum to insure smooth landings, removeable as pilot skills increase.
PivotFlex Wing Mounting System fastens with one nylon bolt, a rubber retainer and pivoting channel absorb minor jolts of normal use, more severe jolts cause the wing to separate from the fuselage and escape the full force of impact.Extensions provide lift even in a stall to keep the NexSTAR level and the pilot in control.One-piece, all wood precision airfoil with SpinControl Airfoil.Wings: CenterCore Molded Composite Main Wing Rib maintains perfect alignment and includes a built-in aileron servo mount, wing halves are joined with a steel rod.46 AX engine, Futaba 4YBF 4-ch radio system with Tx battery (FUTM1440) Rx battery (FUTM1295) Charger (FUTM1830), AFS Dual Conversion Receiver,linkages, and photo-illustrated instructions.Ĭharging Rx and Tx batteries with included charger for 12 hours each Pre-built and covered wings, fuselage and tail assemblies, 2-56 threaded pushrods in lengths of 31", 31", 17", 15" (GPMQ3716) pre-bent main landing gear with three 2.75" (70mm) foam main wheels, steerable nose gear, IsoSmooth aluminum and rubber engine mount, 9.1oz (270cc) fuel tank, 2.24" (57mm) plastic spinner glow plug, 11x5 nylon propeller, RealFlight NexSTAR disc with transmitter interface, O.S. Note: The NexSTAR disk included in this kit is NOT compatible with any version of the RealFlight Add Ons Volumes. STRONG RECOMMENDATION of 3D accelerated video card with 16MB (or more) RAM Optimum System Requirements for the Nexstar Simulation Software:
Note: Window 98 First Edition is not supported with the NexSTAR simulation software Intel Pentium 300 Processor or equivalent 3D accelerated video card with 8MB (or more) RAM Windows XP, 2000, Me or 98 Second Edition
Minimum System Requirements for the Nexstar Simulation Software: Note: The Success Flight information is covered on pg 27 of manual.
Must provide a statement about the crash with signatures from the pilot and instructor Must be within 60 days of purchase date
Must fly with a qualified AMA club instructor
The NexSTAR also carries the Success Flight Guarantee which states" "You will successfully learn how to fly with the NexSTAR or we will replace it with your choice of any Hobbico trainer of up to equal value." The terms are as follows:
In addition to the airplane, radio, and engine, this package also includes a RealFlight NexSTAR Windows PC disc with transmitter interface to use with the included Futaba radio allowing the modeler to practice and perfect their skills without risking the airplane. With such features as AFS (Active Flight Stabilization), SpinControl Airfoil Extensions, SpeedBrakes Training Flaps and much more, no other trainer offers so much help for the first-time pilot. 46 Trainer Glow Powered RTF Airplane, for beginner modeler/fliers.